Artwork

Το περιεχόμενο παρέχεται από το Sarah Thorne, USACE, and Story Studio Network. Όλο το περιεχόμενο podcast, συμπεριλαμβανομένων των επεισοδίων, των γραφικών και των περιγραφών podcast, μεταφορτώνεται και παρέχεται απευθείας από τον Sarah Thorne, USACE, and Story Studio Network ή τον συνεργάτη της πλατφόρμας podcast. Εάν πιστεύετε ότι κάποιος χρησιμοποιεί το έργο σας που προστατεύεται από πνευματικά δικαιώματα χωρίς την άδειά σας, μπορείτε να ακολουθήσετε τη διαδικασία που περιγράφεται εδώ https://el.player.fm/legal.
Player FM - Εφαρμογή podcast
Πηγαίνετε εκτός σύνδεσης με την εφαρμογή Player FM !

3D Printing Nature-Inspired Infrastructure (NII) – The Future is Upon Us!

52:22
 
Μοίρασέ το
 

Manage episode 412870063 series 3433858
Το περιεχόμενο παρέχεται από το Sarah Thorne, USACE, and Story Studio Network. Όλο το περιεχόμενο podcast, συμπεριλαμβανομένων των επεισοδίων, των γραφικών και των περιγραφών podcast, μεταφορτώνεται και παρέχεται απευθείας από τον Sarah Thorne, USACE, and Story Studio Network ή τον συνεργάτη της πλατφόρμας podcast. Εάν πιστεύετε ότι κάποιος χρησιμοποιεί το έργο σας που προστατεύεται από πνευματικά δικαιώματα χωρίς την άδειά σας, μπορείτε να ακολουθήσετε τη διαδικασία που περιγράφεται εδώ https://el.player.fm/legal.
Imagine the possibilities if brilliant scientists and engineers could figure out how to use natural materials like silt and clay, dredged from waterways, to make nature-inspired, 3D printed structures like reefs and roots to restore habitat and protect coastal shorelines. In Season 7, Episode 6, host Sarah Thorne is joined by Al Kennedy, Burton Suedel, and Andrew McQueen from the US Army Corps of Engineers (USACE), Engineer Research and Development Center (ERDC). All three are Research Biologists in the Environmental Laboratory at ERDC. They’re discussing the 3D printing workshop they hosted in February 2024 to explore the potential of nature-inspired 3D printing. As a special feature of this episode, several of the workshop participants share highlights from the workshop discussions and the inspiration for their future work.
The Corps dredges more than 200 million cubic yards of sediment from navigable waterways every year. In Season 5, Episode 6, Lieutenant General Spellman, USACE Commander and Chief of Engineers, spoke about his 70/30 goal–achieving 70% beneficial use of dredged material by 2030. 3D printing can enable new and novel ways to use sediment as a resource and improve the Civil Works’ mission delivery, unlocking some of the constraints on traditional infrastructure engineering by using simple bioinspired design, leveraging natural geometries to produce more pleasing recreational uses, improved ecological functionality, plus economic and social benefits.
The workshop was a key step in advancing the potential of 3D printing by bringing together a diverse group of experts from government, academia, and the private sector to explore the potential of 3D printing using natural materials. Workshop breakout groups focused on four major research areas:
  1. Ecosystem restoration and bioinspired design
  2. Coastal resilience and sustainability
  3. Sediment properties
  4. Scaling up
Key discussions and takeaways from the workshop, include:
  • The importance of being more intentional with infrastructure design, incorporating nature-inspired features to leverage optimizations from nature, and delivering multi-functional materials that offer co-benefits like habitat enhancement alongside primary infrastructure objectives.
  • Discussions on the properties of natural materials and their performance in 3D printers, including stability of end products, and the potential need for pre- and post-processing to meet requirements.
  • Exploring and innovating the best applications for 3D printed materials, such as using dredged material from confined disposal facilities (CDFs) for ports and coastal areas, enhancing community resilience with new or rehabilitated infrastructure like berms.
  • The necessity for maturation and scaling up of 3D printing applications, transitioning from lab-scale to larger format printers suitable for field use, encompassing nozzle design and managing available dredge material for use.
  • The potential safety benefits of using 3D printing to automate infrastructure production in hazardous work environments.
Synergy, engagement, and collaboration was evident throughout the workshop, and participants expressed a strong interest in continuing the dialogue. A report on the workshop results will be available on the EWN website.
For more information and resource links, please visit the EWN Podcast page on the EWN website at https://www.engineeringwithnature.org/

  continue reading

90 επεισόδια

Artwork
iconΜοίρασέ το
 
Manage episode 412870063 series 3433858
Το περιεχόμενο παρέχεται από το Sarah Thorne, USACE, and Story Studio Network. Όλο το περιεχόμενο podcast, συμπεριλαμβανομένων των επεισοδίων, των γραφικών και των περιγραφών podcast, μεταφορτώνεται και παρέχεται απευθείας από τον Sarah Thorne, USACE, and Story Studio Network ή τον συνεργάτη της πλατφόρμας podcast. Εάν πιστεύετε ότι κάποιος χρησιμοποιεί το έργο σας που προστατεύεται από πνευματικά δικαιώματα χωρίς την άδειά σας, μπορείτε να ακολουθήσετε τη διαδικασία που περιγράφεται εδώ https://el.player.fm/legal.
Imagine the possibilities if brilliant scientists and engineers could figure out how to use natural materials like silt and clay, dredged from waterways, to make nature-inspired, 3D printed structures like reefs and roots to restore habitat and protect coastal shorelines. In Season 7, Episode 6, host Sarah Thorne is joined by Al Kennedy, Burton Suedel, and Andrew McQueen from the US Army Corps of Engineers (USACE), Engineer Research and Development Center (ERDC). All three are Research Biologists in the Environmental Laboratory at ERDC. They’re discussing the 3D printing workshop they hosted in February 2024 to explore the potential of nature-inspired 3D printing. As a special feature of this episode, several of the workshop participants share highlights from the workshop discussions and the inspiration for their future work.
The Corps dredges more than 200 million cubic yards of sediment from navigable waterways every year. In Season 5, Episode 6, Lieutenant General Spellman, USACE Commander and Chief of Engineers, spoke about his 70/30 goal–achieving 70% beneficial use of dredged material by 2030. 3D printing can enable new and novel ways to use sediment as a resource and improve the Civil Works’ mission delivery, unlocking some of the constraints on traditional infrastructure engineering by using simple bioinspired design, leveraging natural geometries to produce more pleasing recreational uses, improved ecological functionality, plus economic and social benefits.
The workshop was a key step in advancing the potential of 3D printing by bringing together a diverse group of experts from government, academia, and the private sector to explore the potential of 3D printing using natural materials. Workshop breakout groups focused on four major research areas:
  1. Ecosystem restoration and bioinspired design
  2. Coastal resilience and sustainability
  3. Sediment properties
  4. Scaling up
Key discussions and takeaways from the workshop, include:
  • The importance of being more intentional with infrastructure design, incorporating nature-inspired features to leverage optimizations from nature, and delivering multi-functional materials that offer co-benefits like habitat enhancement alongside primary infrastructure objectives.
  • Discussions on the properties of natural materials and their performance in 3D printers, including stability of end products, and the potential need for pre- and post-processing to meet requirements.
  • Exploring and innovating the best applications for 3D printed materials, such as using dredged material from confined disposal facilities (CDFs) for ports and coastal areas, enhancing community resilience with new or rehabilitated infrastructure like berms.
  • The necessity for maturation and scaling up of 3D printing applications, transitioning from lab-scale to larger format printers suitable for field use, encompassing nozzle design and managing available dredge material for use.
  • The potential safety benefits of using 3D printing to automate infrastructure production in hazardous work environments.
Synergy, engagement, and collaboration was evident throughout the workshop, and participants expressed a strong interest in continuing the dialogue. A report on the workshop results will be available on the EWN website.
For more information and resource links, please visit the EWN Podcast page on the EWN website at https://www.engineeringwithnature.org/

  continue reading

90 επεισόδια

Όλα τα επεισόδια

×
 
Loading …

Καλώς ήλθατε στο Player FM!

Το FM Player σαρώνει τον ιστό για podcasts υψηλής ποιότητας για να απολαύσετε αυτή τη στιγμή. Είναι η καλύτερη εφαρμογή podcast και λειτουργεί σε Android, iPhone και στον ιστό. Εγγραφή για συγχρονισμό συνδρομών σε όλες τις συσκευές.

 

Οδηγός γρήγορης αναφοράς